Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Vorstellung von neuen Herstellern und Produkten, die sich nicht den einzelnen Themen zuordnen lassen

Dieser Teil ist auch für unsere Gäste sichtbar !

Moderatoren: Harald, z_peter

Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Alex_dn »

Hello friends,

Here is another upgrade kit for Z scale - set of interior lighting boards for Märklin Z 88100 “Senator” train. It is an "exclusive" train, and it’s quite strange that Märklin refused to equip it with interior lighting like their ICE, ICE 3 and BR 601 trains, so I decided to fill this gap on my own.

These lighting boards successfully passed all tests and they work very well and Senator with interior lighting got completely different, much better look. Set of 5 boards is required for one Märklin 88100 set. Lighting boards are equipped with warm white LEDs, and also have reliable flicker-free and soft-off features.

They are also digitally compatible. They don’t have own decoders, but for example, if you want to make Märklin 88100 train set digital (decoder with auxiliary output channel needed) or if someone will make a dedicated drop-in digital decoder for this train set in future, these boards can be easily attached to it. Furthermore, boards can be installed in any direction because they are equipped with a rectifiers.

I used white PCB color (instead of “traditional” green) for better light distribution. These boards have factory quality; I’ve ordered PCBs from one of local electronic manufacturers. Some soldering work is required for installation.

Here are some technical specifications:
● Voltage working range - 0-15V AC or DC (at approx. 4-5V LEDs start to ignite)
● Power consumption - 8 mA at 10V AC or DC per one board; total consumption for the set of 5 boards - 40 mA at 10V AC or DC
● Flicker-free function
● Soft-off function

All attached photos are clickable for viewing in full size. Note: I also replaced stock yellow headlight LEDs with warm white ones in the train on these photos.

Bild
Bild
Bild
Bild
Bild
Bild
Bild
Bild
Oli Paßmann (✝)
Beiträge: 183
Registriert: Fr 10. Dez 2010, 19:44
Modellbahn: nur Z (1:220)
Wohnort: D-59425 Unna
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Oli Paßmann (✝) »

Hello Alex,

nice but not new:
https://www.youtube.com/watch?v=f6o2wPa ... JstcWNllPw
https://www.youtube.com/watch?v=f6o2wPa ... w&index=17

Done it in 2010, sold not many of them...


Best,
Oliver
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Alex_dn »

Hello Oliver,

Thank you for the links! If I knew about your kits for Senator, I would have not developed my own :)

I made my kits about 2 years ago, and my goal was not just to sell them, but first to make my own Senator train better.
Do you still have a decoders (or motherboards + decoders) for Senator train for sale? I contacted Claudius Veit from Velmo about decoders for Senator and he answered that he has no plans to make them because this train is very rare and unpopular. And unfortunately I simply have no time to develop them, but I'm ready to buy them for my Senator if someone can offer...

Regards,
Alex
Oli Paßmann (✝)
Beiträge: 183
Registriert: Fr 10. Dez 2010, 19:44
Modellbahn: nur Z (1:220)
Wohnort: D-59425 Unna
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Oli Paßmann (✝) »

Hi Alex,

as I wrote it was not a top seller and finally not worth the development.
In my opinion there is no relevant market for this product but anyway: It’s no problem for me if you produce and sell them.

Because of less room inside the motor cars (and I wanted interior lights there, too) decoders are connected by wires.
As I remember I have used a ct DCX74 but a D&H DH05c or a ESU Lokpilot nano (which have not been existing in 2010) will also fit.
If you like me to install the decoders or if you have any further questions or suggestions please feel free to contact me directly at info@passmann.com

Best,
Oliver
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Alex_dn »

Hi Oliver,

my idea was to make the same solution for Senator as Claudius made for VT 11.5 - two decoders for motor cars (with interior lights, right as you said) and a strand of lighting boards for other cars. Since I cannot produce custom made decoders like Velmo, I even started to develop a motherboard for Senator motor cars with a dedicated place for a small decoder. But this project is not a subject of high priority for me too, so I just thought that maybe you have already developed the same motherboards. Installation of the decoder with wired outputs is not a problem for me, but I'd like to have a more professional solution.

Regards,
Alex
Torsten83
Beiträge: 6226
Registriert: Mo 13. Dez 2010, 08:38
Modellbahn: TT (1:120)
Wohnort: Düsseldorf
Hat sich bedankt: 362 Mal
Danksagung erhalten: 330 Mal
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Torsten83 »

Hallo,

das schöne Angebot von Alex habe ich angenommen und möchte nach der Innenbeleuchtung dann natürlich auch eine Inneneinrichtung nachrüsten :) dazu dann später mal mehr...

Aber mal eine Frage in die Runde: sehen alle Platinen der SENATOR Triebwagen so aus, als hätte man bei Märklin Lötzinn im Übermaß gehabt?
sentor-2.jpg
Und welchen Sinn hat dieses Bauteil? Hier wurde scheinbar eine normale Platine manuell unterbrochen, um es in noch viel mehr Lötzinn einlöten zu können:
sentor-1.jpg
Ich habe die Platinen von Alex erstmal nur auf die Stifte aufgelegt, das hält auch:
sentor-3.jpg
Gruß,
Torsten
Klaus M
Beiträge: 3369
Registriert: Mo 13. Dez 2010, 10:44
Modellbahn: nur Z (1:220)
Wohnort: Metz-/Möhr-ingen
Hat sich bedankt: 169 Mal
Danksagung erhalten: 497 Mal

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Klaus M »

Hallo Torsten,

bei meinem Senator sehen die Platinen auch so aus. Der Sinn des Widerstands (?) erschließt sich mir auch nicht.

Klaus
DiRo
Beiträge: 5702
Registriert: Di 14. Dez 2010, 22:05
Modellbahn: nur Z (1:220)
Wohnort: Wiege des Ruhrbergbaus
Hat sich bedankt: 172 Mal
Danksagung erhalten: 195 Mal

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von DiRo »

Torsten83 hat geschrieben: So 13. Mai 2018, 00:38...Aber mal eine Frage in die Runde: sehen alle Platinen der SENATOR Triebwagen so aus, als hätte man bei Märklin Lötzinn im Übermaß gehabt?...
Sollte bestimmt die Fahreigenschaft verbessern...wegen Mehrgewicht. :mrgreen:
Torsten83
Beiträge: 6226
Registriert: Mo 13. Dez 2010, 08:38
Modellbahn: TT (1:120)
Wohnort: Düsseldorf
Hat sich bedankt: 362 Mal
Danksagung erhalten: 330 Mal
Kontaktdaten:

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von Torsten83 »

Danke Klaus. Dachte meiner wäre mal verbastelt wurden, dabei war er angeblich "neu aus Ladenauflösung" und nur äußerst günstig, wegen der schlechten Fahreigenschaften... wenn ich bedenke, was ich da an Ersatzteilen mittlerweile investiert habe, ist das mit dem günstigen Kauf mittlerweile mehr als relativ :?

@ Dirk: Für extra Gewicht hat Märklin überall in allen Wagen auf das eingeschweißte Gewicht noch ein Gewicht nachträglich aufgeklebt. Mehr Lötzinn könnte da wirklich auch noch zur Optimierung gedient haben ;)

Die Beleuchtung von Alex ist wirklich klasse! Das Nachleuchten ist recht kurz, aber es reicht vollkommen aus, um flackerfrei zu fahren 8-)
norm24
Beiträge: 3764
Registriert: Fr 10. Dez 2010, 22:22
Modellbahn: nur Z (1:220)
Hat sich bedankt: 85 Mal
Danksagung erhalten: 66 Mal

Re: Zmodell 10100 - Innenbeleuchtung für Märklin Z 88100 "Senator" zug

Beitrag von norm24 »

Ist doch ein SMD (So Muss Das) Widerstand. :d+w:
Antworten