Bedarfsermittlung Spur Z Digital
-
- Beiträge: 84
- Registriert: Mo 23. Nov 2020, 00:01
- Modellbahn: nur Z (1:220)
- Hat sich bedankt: 4 Mal
- Kontaktdaten:
Bedarfsermittlung Spur Z Digital
Hallo Spur Z Freunde.
Ich bin ein Leidenschaftlicher Modellbahner und Sammler seit Jahrzehnten Spur Z Modelle.
Da mein Junior auch langsam in das alter kommt und das Thema Modellbahn wieder groß wird, habe ich mich entschlossen wieder Anzufangen.
Dann kam das Thema Digital auf. Da es ja außer Vel.. niemand groß gibt der fertige Platinen herstellt, dachte ich mir machst dich ans Werk.
Nach unzähligen Versuchen und Einarbeitung in das Thema war jetzt die ersten Funktionstüchtige Platine fertig.
Würde gerne weiter machen, dabei stellt sich dann nur noch die Frage, ob dies ein Eigenprojekt wird oder ob andere Modellbahner auch Interesse an Platinen haben?
Angedacht war es so das es zwei Versionen geben wird.
1. Version Platine mit SMD Led (Gelb/Rot) ohne Decoder
2. Version Platine mit SMD Led (Gelb/Rot) mit eingebautem Decoder.
Was meint Ihr??
Wird das ein Luftschloss?
Für Eure Antworten und Anregungen bin Ich sehr Dankbar.
Gruß Christian
Ich bin ein Leidenschaftlicher Modellbahner und Sammler seit Jahrzehnten Spur Z Modelle.
Da mein Junior auch langsam in das alter kommt und das Thema Modellbahn wieder groß wird, habe ich mich entschlossen wieder Anzufangen.
Dann kam das Thema Digital auf. Da es ja außer Vel.. niemand groß gibt der fertige Platinen herstellt, dachte ich mir machst dich ans Werk.
Nach unzähligen Versuchen und Einarbeitung in das Thema war jetzt die ersten Funktionstüchtige Platine fertig.
Würde gerne weiter machen, dabei stellt sich dann nur noch die Frage, ob dies ein Eigenprojekt wird oder ob andere Modellbahner auch Interesse an Platinen haben?
Angedacht war es so das es zwei Versionen geben wird.
1. Version Platine mit SMD Led (Gelb/Rot) ohne Decoder
2. Version Platine mit SMD Led (Gelb/Rot) mit eingebautem Decoder.
Was meint Ihr??
Wird das ein Luftschloss?
Für Eure Antworten und Anregungen bin Ich sehr Dankbar.
Gruß Christian
-
- Beiträge: 1027
- Registriert: Mo 18. Jul 2016, 11:37
- Modellbahn: nur Z (1:220)
- Hat sich bedankt: 20 Mal
- Danksagung erhalten: 279 Mal
- Kontaktdaten:
Re: Bedarfsermittlung Spur Z Digital
Hello Christian,
Along with Velmo, I develop and produce a lot of digital for Z scale - different types of digital interior lighting boards for a wide range of passenger and baggage cars, including even the smallest 2-axle models. All my lighting boards feature good and reliable buffering, as well as red lights for both ends of the car. I constantly add more types of decoders for more kinds of rolling stock. Along with lighting boards, I also offer appropriate sliding contacts for most types of coaches. There are also sound decoders in my product range.
Here is my last addition - digital interior lighting and interior details insert for Doppelstockwagen:
viewtopic.php?f=16&t=15455
In the beginning of the report there is a list of links to all my other digital solutions for interior lighting - you may take a look at all of them if you wish.
Here is my digital decoder with interior lighting for Märklin 88100 "Senator" train:
viewtopic.php?f=43&t=13281
And earlier, analog version for the same one:
viewtopic.php?f=36&t=12001
For my DR BR 120 Taigatrommel locomotive I also developed a sound decoder board:
viewtopic.php?f=40&t=15028
Regarding your question, Velmo product range covers most variants of existing Märklin Z scale motive power (except steam locomotives). I use these decoders in locomotives in my own collection too. In my opinion, there is no need for an alternative to this already existing very good solution. The only subject that is still lacks a dedicated solution - locomotives with new coreless motors. Only few models released by Velmo to date - for BR 194, BR 212 and BR 141 (and also for Rokuhan BR 181 that also features coreless motor). I don't know if Velmo will release new decoders in future (I hope very much either), but currently it is an area where a lot of work is needed.
Best regards,
Alex
Along with Velmo, I develop and produce a lot of digital for Z scale - different types of digital interior lighting boards for a wide range of passenger and baggage cars, including even the smallest 2-axle models. All my lighting boards feature good and reliable buffering, as well as red lights for both ends of the car. I constantly add more types of decoders for more kinds of rolling stock. Along with lighting boards, I also offer appropriate sliding contacts for most types of coaches. There are also sound decoders in my product range.
Here is my last addition - digital interior lighting and interior details insert for Doppelstockwagen:
viewtopic.php?f=16&t=15455
In the beginning of the report there is a list of links to all my other digital solutions for interior lighting - you may take a look at all of them if you wish.
Here is my digital decoder with interior lighting for Märklin 88100 "Senator" train:
viewtopic.php?f=43&t=13281
And earlier, analog version for the same one:
viewtopic.php?f=36&t=12001
For my DR BR 120 Taigatrommel locomotive I also developed a sound decoder board:
viewtopic.php?f=40&t=15028
Regarding your question, Velmo product range covers most variants of existing Märklin Z scale motive power (except steam locomotives). I use these decoders in locomotives in my own collection too. In my opinion, there is no need for an alternative to this already existing very good solution. The only subject that is still lacks a dedicated solution - locomotives with new coreless motors. Only few models released by Velmo to date - for BR 194, BR 212 and BR 141 (and also for Rokuhan BR 181 that also features coreless motor). I don't know if Velmo will release new decoders in future (I hope very much either), but currently it is an area where a lot of work is needed.
Best regards,
Alex
Zuletzt geändert von Alex_dn am Mo 23. Nov 2020, 01:26, insgesamt 4-mal geändert.
-
- Beiträge: 3803
- Registriert: Fr 10. Dez 2010, 22:22
- Modellbahn: nur Z (1:220)
- Hat sich bedankt: 91 Mal
- Danksagung erhalten: 68 Mal
Re: Bedarfsermittlung Spur Z Digital
Für welche Lok soll den Deine Platine sein? Welcher Dekoder passt dann? Ich denke eine für alles wird es wohl nicht geben.
Wie willst Du den Service und die Produktpflege sichern? Etwas genauere Angaben wären sicherlich hilfreich.
Wie willst Du den Service und die Produktpflege sichern? Etwas genauere Angaben wären sicherlich hilfreich.
-
- Beiträge: 3410
- Registriert: Mo 13. Dez 2010, 10:44
- Modellbahn: nur Z (1:220)
- Wohnort: Metz-/Möhr-ingen
- Hat sich bedankt: 175 Mal
- Danksagung erhalten: 508 Mal
Re: Bedarfsermittlung Spur Z Digital
Hallo Christian,
es gab/gibt noch andere Hersteller, z.B. Digitrax oder JSS-Elektronik.
Wenn Du etwas neues machen willst, würde ich mich auf die neue Generation der Märklin-Loks mit Glockenanker-Motoren konzentrieren.
Klaus
es gab/gibt noch andere Hersteller, z.B. Digitrax oder JSS-Elektronik.
Wenn Du etwas neues machen willst, würde ich mich auf die neue Generation der Märklin-Loks mit Glockenanker-Motoren konzentrieren.
Klaus
-
- Beiträge: 585
- Registriert: So 24. Mai 2020, 13:18
- Modellbahn: nur Z (1:220)
- Wohnort: 83334 Inzell
- Hat sich bedankt: 36 Mal
- Danksagung erhalten: 90 Mal
Re: Bedarfsermittlung Spur Z Digital
Ich hätte in jedem Fall Bedarf, insbes. für Loks, die nicht im Angebot von Claudius (Velmo) sind, bspw. Dampfloks, Glockenankerloks oder z.b. die Steuerwagen mit Lichtwechsel.
Viel Erfolg,
Thomas
Viel Erfolg,
Thomas
-
- Beiträge: 5284
- Registriert: Mi 22. Dez 2010, 08:46
- Modellbahn: nur Z (1:220)
- Wohnort: Traunstein
- Hat sich bedankt: 118 Mal
- Danksagung erhalten: 90 Mal
Re: Bedarfsermittlung Spur Z Digital
Morgen Christian
Wenn es etwas Neues sein soll, wäre das gut.
Velmo hat schon eine gute Anzahl an Austausch- Platinen im Angebot.
Alex macht Beleuchtungs-Platinen für verschiedene Wagen.
Klaus hat schon geschrieben, Modelle mit dem neuen Motor sollten berücksichtigt werden.
Wenn es etwas Neues sein soll, wäre das gut.
Velmo hat schon eine gute Anzahl an Austausch- Platinen im Angebot.
Alex macht Beleuchtungs-Platinen für verschiedene Wagen.
Klaus hat schon geschrieben, Modelle mit dem neuen Motor sollten berücksichtigt werden.
-
- Beiträge: 1152
- Registriert: Di 25. Jun 2013, 01:32
- Modellbahn: nur Z (1:220)
- Wohnort: Renningen
- Hat sich bedankt: 32 Mal
- Danksagung erhalten: 189 Mal
- Kontaktdaten:
Re: Bedarfsermittlung Spur Z Digital
Sehe ich auch so. Für die V200.0 gibt es noch nichts von Velmo. Wenn der Preis stimmt, würde ich 5 Stück davon abnehmen.
Re: Bedarfsermittlung Spur Z Digital
Also ich habe 9 ice 3 und bekomme nicht einen Satz Decoder dafür
-
- Beiträge: 5284
- Registriert: Mi 22. Dez 2010, 08:46
- Modellbahn: nur Z (1:220)
- Wohnort: Traunstein
- Hat sich bedankt: 118 Mal
- Danksagung erhalten: 90 Mal
Re: Bedarfsermittlung Spur Z Digital
Hallo Sascha
Ich kenne mich nicht so aus mit dem ICE
Was ist damit?
https://www.1zu220-shop.de/VELMO-Decode ... ac6470757a
Ich kenne mich nicht so aus mit dem ICE
Was ist damit?
https://www.1zu220-shop.de/VELMO-Decode ... ac6470757a
-
- Beiträge: 1220
- Registriert: Mi 29. Dez 2010, 08:14
- Modellbahn: nur Z (1:220)
- Wohnort: Zizers
- Hat sich bedankt: 240 Mal
- Danksagung erhalten: 55 Mal
Re: Bedarfsermittlung Spur Z Digital
Hagen, das sind die Decoder für den ICE Experimental.
https://de.wikipedia.org/wiki/InterCityExperimental
Sascha sucht welche für den ICE 3.
https://de.wikipedia.org/wiki/ICE_3
@Sascha
Wie wäre es damit:
viewtopic.php?f=16&t=14524
https://de.wikipedia.org/wiki/InterCityExperimental
Sascha sucht welche für den ICE 3.
https://de.wikipedia.org/wiki/ICE_3
@Sascha
Wie wäre es damit:
viewtopic.php?f=16&t=14524