Zmodell accessories at www.1zu220-shop.de

Vorstellung von neuen Herstellern und Produkten, die sich nicht den einzelnen Themen zuordnen lassen

Dieser Teil ist auch für unsere Gäste sichtbar !

Moderatoren: Harald, z_peter

zdrada69
Beiträge: 1090
Registriert: So 27. Mai 2018, 22:43
Modellbahn: nur Z (1:220)
Hat sich bedankt: 99 Mal
Danksagung erhalten: 30 Mal

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von zdrada69 »

I think photoetched unpainted part is OK
Klaus Neumann
Beiträge: 872
Registriert: Do 20. Jul 2017, 20:19
Modellbahn: nur Z (1:220)
Hat sich bedankt: 47 Mal
Danksagung erhalten: 9 Mal

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Klaus Neumann »

Hallo Pawel,

Vielen Dank für Ihre Anfrage! Tatsächlich habe ich bereits zahlreiche Anfragen bezüglich dieser Türen erhalten ... Hier ist, was mich immer noch davon abhält, sie anzubieten - es gibt zu viele Farbversionen (verschiedene Grüntöne, Brauntöne, Grautöne, Königsblautöne usw.). Es wäre zu schwierig für mich, alle möglichen Versionen zu erstellen, daher muss ich diese Teile unbemalt anbieten, und die Lackierung sollte vom Kunden durchgeführt werden. Manuelles Malen mit Pinsel liefert weniger Qualität als Airbrush. All dies kann meiner Meinung nach einige potenzielle Kunden davon abhalten, diese Kits zu kaufen.

Wenn der Bedarf an Malerarbeiten für die meisten Käufer jedoch keine Schwierigkeit darstellt, werde ich sie wahrscheinlich zu meiner Produktpalette hinzufügen.

In Bezug auf Barrieren für Viehwagen - es war mit ihnen viel einfacher - noch einmal aus dem Grund der Malerei: Erstens gibt es bereits eine passende Farbe, und ich muss keinen bestimmten Farbton mischen; Als nächstes benötigen die Barrieren nur eine Farbe anstelle mehrerer Varianten für die Schiebetüren, die ein präzises Mischen erfordern.

Schöne Grüße,
Alex



Hallo Alex,

es wäre schön, wenn du deinen Text zusätzlich mit GOOGLE TRANSLATER in's Deutsche übersetzen würdest.
Ich hab das mal für dich gemacht.

GrüZZe
Klaus
Mark
Beiträge: 240
Registriert: Mo 13. Jan 2014, 09:08
Modellbahn: nur Z (1:220)
Hat sich bedankt: 18 Mal
Danksagung erhalten: 5 Mal

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Mark »

:?
Soweit waren wir doch schonmal....
viewtopic.php?p=212598#p212598
Axel Hempelmann hat geschrieben: Di 5. Jan 2021, 09:30
Anmerkung des Administrators:

Hallo,
die Beiträge wurden uns gemeldet mit der Aufforderung, hier zu moderieren. Daher möchte ich nochmals klarstellen:

wir sind ein internationales Forum und viele User benötigen auch ein Übersetzungsprogramm, um deutsche Texte zu verstehen.

Ich finde es toll, dass Alex' Beiträge hier in Englisch stehen und nicht in seiner Muttersprache! Das versteht schon mal ein größerer Leserkreis. Ob er dazu bereits ein Übersetzungsprogramm nutzt, ist mir nicht bekannt; ich gehe aber davon aus. In welche Sprache soll Alex das denn Eurer Meinung nach noch zusätzlich übersetzen?

Warum wäre es einfacher, wenn Alex das noch ins Deutsche (und vielleicht auch gleich ins Italienische, Französische, Niederländische und sonst was) übersetzt, als dass es jeder für sich in die für ihn selbst geläufigste Sprache übersetzen lässt, wenn er etwas nicht versteht?

Oder meinte hier jemand nur: "es wäre FÜR MICH einfacher?" Kann ich akzeptieren; dann schreibt das aber bitte auch so und verallgemeinert das nicht!

Natürlich ist es auch einfacher, ein Produkt wg fremdsprachiger Beschreibung nicht zu kaufen, als bei Google "automatisch übersetzen" einzuschalten. Das soll bitte jeder machen, wie er will, aber bitte nicht versuchen, dieses Verhalten anderen aufzuzwingen!

Ich hoffe, dass dieses Thema nicht immer wieder neu diskutiert werden muss!

Denkt dran: wir sind alle Ausländer, fast überall auf der Welt.

Viele Grüße aus Bayern
Axel

1. Vorsitzender Z-Freunde International e.V.

https://www.respekt-empire.de/Translato ... lateEngine
aufsteiger
Beiträge: 1464
Registriert: Mi 22. Dez 2010, 20:15
Hat sich bedankt: 352 Mal
Danksagung erhalten: 23 Mal

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von aufsteiger »

Klaus, das kann doch jeder selber machen. Wir sind ein internationales Forum :drink:

Liebe Grüße
Michael
aufsteiger
Beiträge: 1464
Registriert: Mi 22. Dez 2010, 20:15
Hat sich bedankt: 352 Mal
Danksagung erhalten: 23 Mal

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von aufsteiger »

Hello Alex,

very nice and useful things, which you have produced. Thank you very much for offering us.

Best wishes
Michael
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Alex_dn »

Greetings to all,

I would like to announce availability of the number of small but useful accessories for Z scale layouts – temporary outdoor barrier structures. Currently it contains two types of crowd control barriers, or simply, fences, and two different kinds of temporary bridges or pedestrian walkways.

All kinds of barriers and bridges are compatible with each other and can be connected together in any combinations. Possible usage scenarios are very wide: these temporary structures are widely used for road works, for protecting various outdoor restoration facilities, as well as sport and cultural events.

Such bridges often used to organize pedestrian traffic over trenches and pits, as well as entrance checkpoints for outdoor events or certain restricted areas.

All items are made of 0.2 mm etched nickel silver and airbrushed with high quality flat aluminum lacquer paint at the both sides for imitation of zinc-anodized surface. They all come unassembled. I prepared detailed instructions and included printed versions to all of them.

For fixing the barriers and bridges on the layout, I recommend using non-destructive glue, such as Faller Expert Lasercut (No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.

Both variants of fences arranged into 9-piece sets. To assemble them, you will need only a cutter or small scissors capable of cutting thin metal and precise tweezers. Each fence section has a size of 12 x 5.25 mm (without hinges and hooks) which equals to the real-life size of 2.5 x 1 m.

Important: nickel silver is a good material for many models and accessories; however, it is relatively brittle. What does it mean? If you fold a piece of nickel silver several times back and forth, it will break very quickly. That’s why I ask to assemble these tiny parts very carefully. I intentionally made them very thin in order to achieve realistic look in such a small scale as much as possible. Nevertheless, they are strong enough if assembled correctly.

Crowd control barriers, set #1:
https://www.1zu220-shop.de/Zmodell/Zube ... 41399.html

Bild

Bild

Bild

Prototypes:
Bild

Bild

Assembly instructions:
ZM-MS-008.pdf
(41.75 KiB) 188-mal heruntergeladen

Crowd control barriers with warning stripes, set #2. Red and white color stripes were printed directly onto the surface using UV-printing technology:
https://www.1zu220-shop.de/Zmodell/Zube ... 41400.html

Bild

Bild

Bild

Prototype (the colors of warning stripes are different):
Bild

Assembly instructions:
ZM-MS-009.pdf
(44.77 KiB) 183-mal heruntergeladen

Now let me show the bridges. The size of the side railings is equal to the size of barriers – 12 x 5.25 mm (equals to 2.5 x 1 m in 1:1 scale). The width of the walkway is 4.5 mm that equals to nearly 1 meter in the real life.

Important: a special bending tool is required for assembly of these bridges. It is impossible to bend them correctly using only tweezers or any other universal tool – the bridges will definitely be damaged! I will not accept any complaints in this case. Please I kindly ask for understanding.

A big number of different variants of this tool is available on the market; here is just a sample of what is needed:
Bild

Temporary pedestrian walkway bridge, variant #1:
Bild

Bild

Prototype:
Bild

Assembly instructions:
ZM-MS-010.pdf
(2.33 MiB) 198-mal heruntergeladen

Double temporary pedestrian walkway bridge, variant #2. Dimensions of each walkway section are similar to the variant #1. Total width is 13.5 mm.
Bild

Bild

Prototype:
Bild

Assembly instructions:
ZM-MS-011.pdf
(3.05 MiB) 181-mal heruntergeladen

Note: Airbrushed flat aluminum lacquer coating is strong enough even to withstand deformations like bending. Nevertheless, sometimes, minor scratching of the lacquer coating may occur when using bending tool. To fix possible scratches, use Tamiya LP-38 “Flat Aluminum” lacquer paint. It can be applied manually using thin paintbrush either airbrushed. For airbrushing, it is recommended to mix Tamiya LP-38 paint with Tamiya Lacquer Thinner (Retarder Type, Art. #87194) by 50/50 proportion.

Replacement LEDs for digitizing Märklin EMD E8A/E9A diesel locomotives

I developed one more accessory that will be very useful to those who would like to digitize Märklin EMD E8A/E9A diesel locomotives (88627, 88628, 88629). In my opinion, Märklin’s approach to making headlights for this locomotive is better – the LED is allocated directly behind the headlight hole, so that all light comes out at full extent. In my opinion, AZL’s solution is less optimal, as the light from the LED on the circuit board has to travel a long way through the curved lightguide – unfortunately, a lot of light is lost this way; as a result, headlight is quite dull.

However, Marklin’s variant has a downside – it is difficult to digitize these locos using drop-in boards from Digitrax and TCS. I developed a perfect solution for this – a small separate circuit board with warm white LED and flexible wire outputs.

I tried to use different sizes of LEDs; I chose SMD 3014 warm white LED as the best suitable option. There is no need to write a long story; I just post a number of detailed pictures that speak for themselves (Digitrax DZ123Z0 digital decoder used here). It is only worth mentioning that the circuit board isolated from the chassis very reliably; short circuit is not possible:
Bild

Bild

Bild

Bild

Bild

Bild

Bild

Bild

Installation instructions:
ZM-LD-001.pdf
(427.54 KiB) 192-mal heruntergeladen
These LEDs are available at some dealers in the USA here:
http://www.zscalemonster.com/zmodell/

https://zscalehobo.com/zmodell/zmodell.html

I can also ship them directly worldwide. Unfortunately, no official sales in EU are currently possible, as each electric device requires CE certification for this. There are no exceptions even for single LEDs. Such certification is a subject of huge investments, which is not planned by me at the moment.

Best regards,
Alex
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Alex_dn »

Here is a couple of usage samples for barriers and bridges together. Note the typical metal texture reproduced on the walkway’s floors:
Bild

Bild
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Alex_dn »

Hi friends,

After numerous requests, I offer for sale metal etched sliding doors for small 2-axle freight cars - type Pwg and G 10. I prepared three different variants:

1. ZM-MS-012 - for type Pwg 14 baggage car:
https://www.1zu220-shop.de/Zmodell/Zube ... 41727.html
Bild
Bild

2. ZM-MS-013 - for type Pwg 14 baggage car with windows:
https://www.1zu220-shop.de/Zmodell/Zube ... 41728.html
Bild
Bild

3. ZM-MS-014 - for type G 10 freight car:
https://www.1zu220-shop.de/Zmodell/Zube ... 41729.html
Bild
Bild

Due to a big number of possible color variants (different shades of green, brown, blue, gray, white), the doors come unpainted. Painting should be done by customer. It can be done manually using paintbrush either airbrushed. For best results, I recommend airbrushing using thinned quick drying semi-gloss lacquer paint (Tamiya, Revell etc.)

For installation of the sliding doors, upper guiding rails should be carefully removed. It can be done without complete disassembly of the car using small thin screwdriver or tweezers. I also recommend to paint guiding rails into the matching color together with sliding doors.

About ZM-MS-013 - kit for type Pwg 14 baggage car with windows: I included a sheet of 0.2 mm transparent plastic with printed grilles. After painting the sliding doors, grilled windows should be carefully cut out and applied from the rear side of the doors using Faller Expert Lasercut (Art. No. 170494) or similar invisible glue. Please don't use plastic or CA glues, as they can damage paint coating and transparent plastic. To achieve best results, I recommend picking very small drops of glue with a sharp toothpick either with a piece of thin wire or needle.
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Alex_dn »

Here is a pair of another small enhancements for those who model Swiss layouts - railway station signboards "SFF CFF FFS". They are made of thick 0.3 mm etched metal, airbrushed with black lacquer paint from the both sides and printed using high resolution UV-curing technology. After this, signboards were additionally secured with semi-gloss lacquer. I prepared two different variants:

Variant 1, suits best to Kibri 6700 "Bad Neuheim, Kibri 36704 "Friedrichstal", Faller 2712 "Neustadt", but not limited by these kits:
https://www.1zu220-shop.de/Zmodell/Zube ... 41730.html
ZM-MS-015.jpg

Real life sample, Bahnhof Genève-Cornavin:
Bild

Variant 2, suitable for any railway station buildings, platforms with canopy and others:
https://www.1zu220-shop.de/Zmodell/Zube ... 41731.html
ZM-MS-016.jpg

Real life sample, Lugano Hbf:
1306_1200_0_711d189175.jpeg
ZM-MS-016-1.jpg
Printed drilling maps for both variants are included into the package.

Best regards,
Alex
Alex_dn
Beiträge: 1021
Registriert: Mo 18. Jul 2016, 11:37
Modellbahn: nur Z (1:220)
Hat sich bedankt: 20 Mal
Danksagung erhalten: 277 Mal
Kontaktdaten:

Re: Zmodell accessories at www.1zu220-shop.de

Beitrag von Alex_dn »

Greetings to all,

One more accessory is available now - ZM-SC-011 - sliding contacts for Märklin® 4-axle "Langenschwalbach" design passenger cars. It is the smallest 4-axle passenger cars in the whole Z scale range:

356a88ab909e62b24fd0a532bc0f451b1434538657.jpg

As no other kinds of wipers are suitable to such small trucks installed in these cars, I decided to develop a separate variant. Just like other wipers, these ones are made of 0.05 mm thick high-flexible photo-etched brass.

Compatible trains sets are the following - Märklin® 8119, 8768, 87681. They are available here:
https://www.1zu220-shop.de/Zmodell/Zube ... 42609.html
(Important: please see additional pictures for detailed installation instructions)

20210910_231805.jpg

Here is a comparison of Langenschwalbach wipers with ones for standard long 4-axle passenger cars (ZM-SC-001):

20210910_231901.jpg

Here are some pictures with installation tips. Holes in the truck pivots should be drilled using 0.8 mm drill bit. It is important to align the hole precisely in the center:

20210802_005749.jpg
20210802_011011.jpg
20210810_174000.jpg

Note: for installation of sliding contacts, metal weight insert should be carefully removed and partially isolated with pieces of adhesive tape before re-installing back again:

20210811_010754.jpg
20210811_012508.jpg
20210811_012545.jpg

Note: digital decoder suitable for "Langenschwalbach" passenger cars will be available as soon as Doehler & Haass delivers updated 2nd generation FH05B function decoders.

Best regards,
Alex
Antworten